VW AAZ 1.9TDI Engine

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

VW AAZ 1.9TDI Engine For Sale

The moment you notify us, your engine inquiry will be dispatched to an extensive network of VW motor importers, scrap yards, re-manufacturers, and car salvage yards. They will promptly respond directly to you.

  • Save your time! Connect with a vast array of salvage yards and engine importers in mere seconds.
  • Receive multiple quotes! A variety of salvage yards will reach out to you with their competitive offers.
  • Purchase directly from the source! – There are no intermediary costs!

You can reach us at tel:0871352226 087 135 2226 (Mon – Fri).

Please note that pricing is subject to change at any time without prior notice.

Images have been used solely for illustrative purposes.

All our engine suppliers offer a warranty and pressure test each engine, please enquire with them for more details.

ENGINE REPLACEMENT GUIDELINES
Step Difficulty (1-5) Average Time
Replace engine oil 1 30-60 minutes
Replace fuel filter 2 30-60 minutes
Replace antifreeze 1 30-60 minutes
Replace oil filter 1 10-20 minutes
Replace oil cooler 3 2-4 hours
Clean cooling system 2 1-2 hours
Replace water pump 4 2-4 hours
Replace hoses and belts 2 1-2 hours
Replace timing belt 5 4-8 hours
Install new spark plugs and wires 2 1-2 hours
Replace gaskets and seals 4 4-8 hours
Clear computer codes 1 10-30 minutes
Ensure replacement engine matches specs 2 30-60 minutes
Transfer accessory components 3 2-4 hours
Prime oil system 2 30-60 minutes
Remove plugs and tape before install 1 10-30 minutes

The difficulty ratings are based on the complexity of each task and the skill level required. The average times are estimates and can vary significantly depending on the specific vehicle, engine configuration, and the mechanic's experience. Overall, a complete engine replacement is a major undertaking that can take anywhere from 15-30 hours or more for an experienced mechanic.

7 COMMON MISTAKES TO AVOID !
  1. Not clearing all computer codes before installation.
  2. Omitting the addition of engine oil before the initial start-up.
  3. Neglecting to disable the fuel and ignition systems, which is crucial for oil priming.
  4. Overlooking the replacement of the oil cooler or the radiator’s oil cooler.
  5. Failing to properly clean the radiator and verify the functionality of the cooling fans.
  6. Not replacing the flywheel and its bolts.
  7. Attempting to start the engine without prior priming.

Latest Engine Enquiries